EPSON Stylus PHOTO RX600/610, RX620/630 Revision C
Adjustment Adjustments by Adjustment Program 66
5.2 Adjustments by Adjustment Program5.2.1 Overview
This machinery is adjusted by using specialized adjust program. Adjusted revision
figure is written into EEPROM of Main Board.
Operating environment
OS : Windows 98/Me/2000/XP
Hardware : PC equipped with USB 1.1/2.0 I/F
Program constitution
•SPRX600_Ver10.exe (program main file)
•D4Comm.dll
•OsSwitch.dll
•PrnDrv98.dll
•PrnDrvXP.dll
5.2.1.1 Installing the Adjustment Program
Copy the five files listed above into any desired folder on the PC.
5.2.1.2 Starting the Adjustment Program
1. The following start screen is displayed when the adjustment program has been
started. Then select a model name, destination and port.
Figure 5-1. Adjustment Program Start Screen
2. Click the [OK] button.
3. Select the item to be executed by clicking the tab.
Figure 5-2. Adjustment Program Screen
Quitting the program
Clicking the [Quit] button displays the window shown below.
[Quit] button : Finishes the adjustment and closes the program.
[Continue] button : Returns the program to the start screen.
Figure 5-3. Quit Screen
CHECK
P O I N T
Before installing this program, make certain that a USB
driver has been installed on the PC properly.
Make sure that the five files are contained in the same folder.
CHECK
P O I N T
While Stylus PHOTO RX600/610, RX620/630 is warming up
(Power LED is flashing), you cannot run the program (a
communication error occurs). Run the program after making
certain that the Power LED of the printer is lit.
Click a tab for selection
[Quit] button
[Get Status] button Acquires
printer information, and displays it
to the right.