EPSON Stylus PHOTO RX600/610, RX620/630 Revision C

Maintenance Lubrication 83

6.3.3 Lubrication Points of the Printer
The types and amount of the oils and grease for lubrication of the Printer are
determined based on factory evaluation. Therefore, be sure to apply a specified volume
of the designated grease to each designated point for repair and maintenance of the
Printer. The designated grease and application points are indicated below.
Front Frame
ASF Unit
Figure 6-3. Lubri c ati ng Points (Front Frame)
Figure 6-4. Lubricating Points (Paper return lever)
C A U T IO N Never use any oil or grease other than designated, since any
other oil or grease can badly affect the machine life or function
of the product or damage the mechanism.
As the volume of application is also designated based on
evaluation result, be sure to apply the designated volume of
grease properly.
Table 6-3. Designated Lubrication Points
Assy to be Lubricated
(Reference Page) Lubrication Points /
Amount of Application Precautions
(Fig No.)
Front Frame
(p58)
Lubrication Points
Front of front frame
Grease to be applied
G-58
Amount of Application
φ1mm
Length:Up to 35mm ~ 20mm right
Use an injector to apply
grease.
(See Figure 6-3)
Table 6-4. Designated Lubrication Points
Assy to be Lubricated
(Reference Page)) Lubrication Points /
Amount of Application Precautions
(Fig No.)
Paper return lever
(p55)
Lubrication Points
Paper return cam center area
Grease to be applied
G-26
Amount of Application
φ1 x 1mm
Use an injector to apply
grease.
(See Figure 6-4)
35mm
20mm
Front Frame
G-58
ASF Unit
Paper return lever
G-58