Installing the Printer Driver 111
5
5
5
5
5
5
5
5
5
5
5
5
8. Click Finish and follow the on-screen instructions to complete
the setup.
When you print using Microsoft Network Shared printing in
the Windows 2000/NT/XP environment, see “Using the NET
USE command” on page 111 for more details.
Using the NET USE command
If you are running Windows 2000/NT/XP and using NetBIOS to
connect to the printer, we recommend that you use the NET USE
command, as follows:
1. Click Start, click Control Panel, click Network and Internet
Connections, and then select Network Connections.
2. Under LAN or High-Speed Internet, click the Local Area
Connection icon.
3. Under Network Tasks, click Change settings of this
connection.
4. Check that Client for Microsoft Networks is installed. If it is not
installed, click Install to install it.
5. Run the command prompt and enter the following command.
NET USE printer port: \\NetBIOS name of print server\Device
name of print server
Selecting the port
1. Click Start, click Control Panel, click Printers and Other
Hardware, and then click Printers and Faxes.
2. Right-click the printer icon and then select Properties.