Epson Color Laser Printer - page 175

EpsonNet Direct Print 175
8
8
8
8
8
8
8
8
8
8
8
8
Setting Up Your Printer Using EpsonNet
Direct Print
When setting up a printer to print with LPR, you can add both a
printer located in the same segment and one located beyond a
router.
Note:
❏Be sure that the computer is connected to the network and TCP/IP
is correctly set.
❏The valid IP address must be set; otherwise the printer does not
appear under the Epson_lpr group icon.
❏The EPSON Status Monitor 2 utility shipped with the interface card
models C82362✽/C82363✽/C82364✽ with software version 1.x
and EPL-N2700/N4000 printers enables EPSON TCP/IP printers.
These EPSON TCP/IP printers can coexist with lpr printers added
by EpsonNet Direct Print.
❏The job control functions such as Cancel Printing and Purge Print
Jobs are available when you double-click the target printer icon in
the Printers folder. However, if the printer has already started
printing a document, the print job may not be cancelled completely.
Adding a printer located in the same segment
Follow the steps below to add a printer located in the same
segment.
1. Windows Me: Double-click the My Network Places icon.
Windows 98/95/NT 4.0: Double-click the Network
Neighborhood icon.