36 How to Set Up the Print Server
3. Turn on your printer. After the status lights go off, print a
network status sheet.
cCaution:
After turning off the printer, wait until the status lights go off
before turning it back on; otherwise the print server may not work
correctly.
Note for Mac OS X 2.4:
Since the printer supports Rendezvous and is on by default, you can use
the printer on a network just by connecting it to the network. If you want
to disable the Rendezvous setting, use the printer’s control panel. See
“Setting an IP Address on the Printer’s Control Panel” on page 258 for
details.
Now, you can configure the print server for the network, using
EpsonNet WinAssist/MacAssist. Go to “Installing EpsonNet
WinAssist/MacAssist” on page 36.
Installing EpsonNet WinAssist/MacAssist
You need to install EpsonNet WinAssist or MacAssist to
configure the print server.
Note:
Be sure to use EpsonNet WinAssist/MacAssist included on the Software
CD-ROM shipped with this product.

For Windows

Install EpsonNet WinAssist on your computer to configure the
print server.