220 EpsonNet WebAssist
Interface

Parallel Interface

T. Margin Use this option to specify the distance from the
top of the sheet to the baseline of the first
printable line.
Text Use this option to set the page length in lines.
Auto CR Use the automatic carriage return option to
perform a carriage-return line-feed (CR-LF)
operation whenever the print position exceeds
the right margin.
Auto LF When you set AutoLF to Off, the printer does not
send an automatic line feed (LF) command with
each carriage return (CR). When on, the printer
adds a line feed to each carriage return it
receives.
Alt. Graphic Turns the Alternate Graphics option on or off.
Bit Image With Bit Image set to Dark or Light, your printer
can correctly emulate the graphics densities set
with the printer command. When you select Dark,
the bit image density is high. When you select
Light, the bit image density is low.
Zero Char Select whether the printer prints a slashed zero
or an unslashed zero.
Character Set Select character table.
Set button Saves any changes.
Refresh button Clears any changes and reloads the previous
settings.
Items Explanations
Parallel I/F Allows you to activate or deactivate the parallel
interface.
Speed Select the transfer speed.