EpsonNet WinAssist Configuration Utility 61
3
3
3
3
3
3
3
3
3
3
3
3
Method for specifying the
IP address
Select a method for specifying an IP address. When
you select Automatic, an IP address, subnet mask,
and default gateway are automatically assigned by
the DHCP server.
Note:
If the Dynamic DNS function is not supported, we
recommend that you select Manual and then enter
an IP address. This is because if you select
Automatic, the IP address of the print server changes
every time you turn on the printer so that you need
to change the printer port setting accordingly.
Set using Automatic
Private IP Addressing
(APIPA)
Assigns a private IP address automatically even
when there is no DHCP server on your network. It is
dimmed if this function is not supported.
Set using PING Select this check box when setting an IP address
using the ping command. When not using the ping
command, clear this check box.
Note:
Be sure to clear the check box when not using ping;
this prevents any unexpected change of the IP
address by EpsonNet WebManager.
IP Address Enter an IP address for the print server. Be sure that
the IP address is unique and does not conflict with
any other device on the network.
Subnet Mask Enter the subnet mask of the IP address.
Default Gateway Enter the gateway address.
Extended Settings button Click this button for extended settings such as
Dynamic DNS and Universal Plug and Play. If both
functions are not supported, this button is dimmed.