96 EpsonNet MacAssist Configuration Utility
❏Since the new password takes effect after the data is sent to the
print server, enter the old password immediately after changing
the password.
❏If you forget your password, you need to initialize the print
server. See “Initializing Your Printer” on page 251 for
instructions.
Configuring the Print Server Using EpsonNet MacAssist EasySetup
You can also use EpsonNet MacAssist EasySetup to easily
configure the print server ready for TCP/IP and AppleTalk
printing within a short time.
Note:
❏Make sure the printer is turned on.
❏The computer to use for the following steps must be in the same
segment as the print server.
❏When you assign an IP address manually, we recommend you use
EpsonNet MacAssist to set the subnet mask and default gateway.
Follow the steps below to configure the print server using
EpsonNet MacAssist EasySetup.
1. Mac OS 8.x to 9.x:
Double-click the EpsonNet MacAssist EasySetup icon in the
MacAssistxxx folder.
Mac OS X:
Double-click the EpsonNetMacAssistOSXEasySet icon in the
EpsonNet MacAssistOS X x.xx folder.
2. Click Next.