16
The orange light indicates whether the print server is connected
to 10Base-T or 100Base-TX. The light is on when the connection is
100Base-TX, or off when the connection is 10Base-T.
Note:
See the Reference Guide for the locations of the lights.
Network connector
RJ-45 connector:
This connector is used to connect an Ethernet cable to a network.
You can use this cable for both 10Base-T and 100Base-TX.
cCaution:
You must use a Category-5 shielded twisted-pair cable to connect
the print server to a network to prevent malfunctions.
About the Software❏EpsonNet WinAssist is a Windows-based configuration
utility for administrators that allows you to configure the
print server for TCP/IP, NetWare, MS Network, AppleTalk,
IPP, and SNMP. See “About EpsonNet WinAssist”.
❏EpsonNet MacAssist is a Macintosh-based configuration
utility for administrators that allows you to configure the
print server for TCP/IP, AppleTalk, and IPP. See “About
EpsonNet MacAssist”.
❏EpsonNet WebAssist is a web-based configuration utility
that allows you to configure the print server for TCP/IP,
NetWare, MS Network, AppleTalk, IPP, and SNMP. You can
start EpsonNet WebAssist from EpsonNet WinAssist or
MacAssist, or by typing the IP address of the print server as
the URL in your browser. See “About EpsonNet WebAssist”.