262 Tips for Administrator

Buffer Size

Determines the amount of memory to be used for receiving data
and printing data. If Maximum is selected, more memory is
allocated for receiving data. If Minimum is selected, more memory
is allocated for printing data.
Note:
❏To activate Buffer Size settings, you must turn off the printer for
more than five seconds then turn it back on. Or, you can perform a
Reset All operation, as explained in “Reset Menu” in the Reference
Guide.
❏Resetting the printer erases all print jobs. Make sure the Ready light
is not flashing when you reset the printer.
Setting an IP Address Using the arp/ping Command
If you are using UNIX or OS/2, you need to use the arp and ping
command to set the IP address of the print server. You can also
use these commands with Windows
Me/98/95/XP/2000/NT 4.0, if you have correctly installed
TCP/IP networking on these systems.
Note:
❏Make sure that the Set using PING function is enabled on the
TCP/IP menu in EpsonNet WinAssist or EpsonNet WebAssist. If
this function is disabled, you cannot set the IP address using the
arp/ping command.
❏Make sure the print server and the computer are in the same
segment.
Before you start, you need the following information: