Adjusting the Projection Screen and the Audio Volume

Correctingkeystonekeystonedistortiondistortion(Keystone)

(Keystone)

When you wish to adjust the projection above or below the range of lens shift adjustment set the projector at an angle.

When the projector is angled, the projected image may distort into a trapezoid. In such

cases, press ( ) ( ) on the control panel, oron the remote control to adjust the images

However, the image quality will decrease compared to if the lens shift function is used. When the lens is shifted to the left or right, complete keystone correction is not possible. When making keystone corrections set the lens at the centre left to right.

30°

30°

Keystone distortion can be corrected within a maximum vertical angle of approximately 30°.

Q Tip:

•You can also make adjustments from the configuration menu. spage 28

 

•To reset the correction value, press and hold down

 

with

 

pressed down

 

 

 

 

 

for at least 1 second on the control panel.

Adjusting the volume

Adjusting the volume

The volume of the projector's built-in speaker can be adjusted as follows.

Remote control operation

Control panel operation

Basic

Operations

When the button is pressed to the

side, the volume increases, and when it is pressed to

the side, the volume decreases.

 

QTip: You can also make adjustments from the configuration menu. spage 30

17