Configuration Menu Functions

"Image" menu

Only displayed for component video/composite video/S-Video input

Only displayed for RGB-video/Computer input

Picture Quality

Brightness *1

The brightness of the images can be adjusted.

If projecting in dark rooms or onto small screens and the images appear too bright, decrease the setting.

Contrast *1

Adjusts the difference between bright and dark areas.

When the contrast is increased, images with greater modulation are obtained.

Color Saturation *1

This adjusts the colour intensity for the images.

Tint *1

(Adjustment is only possible when composite video and S-Video signals in NTSC format are being input.)

This adjusts the image tint.

Tracking *1

This adjusts the images if vertical stripes appear in the images.

Sync. *1

This adjusts the images if flickering, fuzziness or interference appear in the images.

•Flickering and fuzziness may also appear in images when the brightness, contrast, sharpness and keystone correction settings are adjusted.

•Clearer adjustments can be obtained if you adjust the "Tracking" first and then adjust the "Sync".

Color Temp. *2

The colour temperature can be selected from three settings in order to adjust the overall tint of the images. spage 20

Skin Tone *2

This adjusts the skin tones of people who appear in the images. spage 20

Sharpness *1

This adjusts the image sharpness.

Color Mode *1

The Color Mode can be selected from six different settings in accordance with the images being projected. spage 18

*1 The setting values are stored separately for each image source and signal type.

*2 The setting values are stored separately for each image source and colour mode setting.

26