Viewing Images at a Preset Image Quality (Memory Function)
The Cinema Color Editor program can also be used to store and retrieve memory settings from a
computer. A computer can be used to make detailed adjustments and these adjustments can be stored
This can be used to save adjusted values for all of the configuration menu items on the left.
using the "Memory: Advance" menu command.
The "Save Memory" command in the "Image" menu is used to save the settings.
The following describes how to save settings.
1. | Adjust the desired settings that you would like to save in memory. | ||
2. | Select "Save Memory" from the "Image" menu and then press |
| . |
| |||
|
|
|
|
3.Select a memory name from Memory1 to Memory 3 to use for saving and then press
.
The status of a memory area is indicated by the colour of the
symbol to the left of the memory name
as follows.
Green : Memory area is in use
Grey : Memory area is not in use Orange : Selected
If you select a memory area that is already in use and press
, the existing contents will be erased and the current settings will be saved in their place.
To erase all memory contents, select "Memory Reset" from the "Reset" menu. spage 31
You can press 
and select the desired memory name from the selection menu.
QTip: •Memory settings that have been applied to images will be retained even when the projector's power is turned off. The same memory adjustment settings will be applied to images that are projected the next time the projector's power is turned on.
•The aspect setting retrieved from memory may not be applied to the images if they are 16:9 images or if the input signal images have a particular resolution.
Image Quality | Adjustments |
23