Configuration Menu Functions

Only displayed for RGB-video/Computer

Save Memory

This can be used to save the current configuration menu settings. s page 22

Load Memory *1

This retrieves settings stored in the memory. spage 22

Auto Setup *1

This sets automatic adjustment to on or off in order to set whether the projector automatically adjusts images to their optimum condition when the input signal is changed. The three automatically adjusted items are "Trackingg", "Position" and "Sync.g"

Reset

This returns all settings in the "Image" menu to their default settings, except for the settings that have been saved using the "Save Memory" command. The "Save Memory" settings can be reset using the "Memory

Reset" menu. page 31

"Setting" menu

Screen

Position *1

Use , , or to move the display position for images.

Progressiveg *1

(This can only be set when composite video or S-Video signals are being input or when 525i/625i signals from component videog or RGB video are being input.)

•OFF :Conversion of interlacedg (i) signals to progressive (p) signals is carried out for each field in the screen. This is ideal for using when viewing images with a large amount of movement.

•ON :Interlaced (i) signals are converted into progressive (p) signals. This is ideal for using when

viewing still images.

Aspectg *1

Selects the aspect mode. s page 18

*1 The setting values are stored separately for each image source and signal type.

Configuration Menu

27