Part Names and Functions

Remote control

Buttons with no explanation function in the same way as the corresponding buttons on the projector's control panel. Refer to "Control panel" for further details on these buttons.

•Remote control light-emitting area•Still button

Pressing this button makes the picture stand still, and pressing it again restores the motion.

•Aspect button s page 18•A/V Mute button

Pressing this button temporarily switches off the picture and the audio, and pressing it again restores them.

•On/Off buttons spage 14

Turns the projector power on / off.

•InputA button

Switches the input source to the projector's [InputA] port.

When you need to switch the input signal to match the equipment that is connected to the [InputA] port, select the correct signal using the selection menu. The change will be reflected in the "InputA" setting in the "Input Signal" menu.

•InputB button

Switches the input source to the projector's [InputB] port.

•S-Video button

Switches the input source to the projector's [S-Video] input port.

•Video button

Switches the input source to the projector's [Video] input port.

•Auto button s page 27

Automatically adjusts RGB video images and analog RGB images from computers to the optimum images.

•Volume button s page 17

Adjusts the volume.

•Esc button s page 18, 20, 22, 32

QTip: The buttons are phosphorescent. In sunlight or under electric lighting they accumulate light, and in the dark they glow.

7