Problem Solving
Are the image signal format | If the signal source is connected to the [InputA] port | ||||
settings correct? | Use the "Input Signal" menu command to set the signal format that | ||||
|
|
| matches the signal that is being projected from the connected | ||
|
|
| equipment. |
|
|
|
|
| s "Setting" - "Input Signal" - "Input A" page 30 | ||
|
|
| You can also press | on the remote control to select the format. | |
|
|
| s page 15 |
|
|
|
|
|
| ||
|
|
| If the VCR or DVD equipment is connected using an RGB SCART | ||
|
|
| adapter |
|
|
|
|
| Press | to set the signal format to | |
|
|
| When still no images appear and the DVD equipment is connected, | ||
|
|
| change the setting at the DVD equipment to RGB output. | ||
|
|
|
| ||
Have the configuration menu | Try resetting all of the current settings. s page 31 | ||||
settings been made correctly? |
|
|
| ||
|
|
|
| ||
Were the projector and | If the connection is made while the power is already turned on, the | ||||
computer connected while their | function (Fn) key that switches the computer's video signal to | ||||
power was already turned on? | external output may not work. Turn the power for the computer that | ||||
|
|
| is connected to the projector off and then back on again. | ||
| When a computer is |
| |||
|
|
|
|
| |
| connected |
|
|
|
|
|
|
|
|
|
|
Is the computer display output | The image signals need to be output externally. Change the output | ||||
set to only the computer's | setting to an external destination only or to an external destination as | ||||
accessory screen? | well as the computer's own monitor. | ||||
|
|
| s Computer documentation, under a title such as "External | ||
| When a computer is |
| |||
|
| output" or "Connecting an external monitor" | |||
| connected |
| |||
|
|
|
|
| |
|
|
|
|
|
|
The message "Not Supported." is displayed
Are the image signal format | If a composite videog or | |||
settings correct? | If projection does not occur when the "Video Signal" menu | |||
|
|
| command is set to "Auto", select the signal format that matches the | |
|
|
| signal source. s "Setting" - "Input Signal" - "Video Signal" | |
|
|
| page 30 |
|
|
|
|
| |
|
|
| If the signal source is connected to the [InputA] port | |
|
|
| Use the "Input Signal" menu command to set the signal format that | |
|
|
| matches the signal that is being projected from the connected | |
|
|
| equipment. s "Setting" - "Input Signal" - "Input A" page 30 | |
|
|
| You can also press | on the remote control to select the format. |
|
|
| s page 15 |
|
|
|
|
| |
Does the mode match the | Use the "Resolution" menu command to check the signals being | |||
frequency and resolution of | input, and check the "List of compatible signals" to make sure that | |||
the image signals? | the signals are compatible. | |||
|
| s "Info" - "Resolution" page 25 | ||
| Only when projecting |
| ||
| computer images |
| s "List of Supported Monitor Displays" page 45 | |
|
|
|
|
|
The message "No Signal." is displayed
Are the cables connected | Check that all of the cables required for projection are securely |
| ||||
correctly? | connected. s page 12 |
|
|
| ||
|
|
|
|
|
|
|
Has the correct video input | Press | , | , | or | on the remote control or | on |
port been selected? | the projector's control panel to change the image source. s page | |||||
| 15 |
|
|
|
|
|
|
|
|
|
|
|
|
Troubleshooting
35