Running Tests

Follow these steps to run a test from the Execute menu:

1.Press m or a to select Execute. You see the Execute menu, such as the following:

System Board

Numeric Coprocessor

System Memory

Diskette Drive A

Hard Disk Drive #l

Serial Port COMl

Printer Port LPTl

Video Adapter Test

Keyboard Test

2.Press (Tl or m to highlight the device you want to test and press IEnter You see the Repeat prompt:

How often to repeat test? 1

3.If you want to run the test once, press (Enter. To run the test more than once, type the number of times and press IEnter

4.If there is only one test for a device, the program begins testing immediately. If there is more than one test for the device, you see a submenu, such as the following:

HARD DISK DRIVE(S) AND CONTROLLER CHECK MENU1 - Seek check2 - Write, read check3 - Read, verify check4 - Run all above checks0 - Exit

Running System Diagnostics 4-5