Note
You cannot change or delete your network server mode password as you enter it to access your computer. You must run SETUP to change or delete it. See Chapter 2 of the Setup Guide for instructions.
Changing the Processor SpeedYour computer’s processor can operate at two speeds: high or low. High speed is the highest speed at which your microprocessor is capable of running, such as 33 or 50 MHz. Low speed simulates an 8 MHz processor to provide compatibility with older application programs.
You can also set the computer to automatic speed, which switches your computer’s processor from high to low speed when it accesses a diskette drive.
*”When your computer is operating. at high speed, the SPEED.’ light on the front panel 1s green. When the computer is operating at low speed, the light is amber.
You should use high speed for almost everything you do because your programs will work faster. However, certain application programs have specific timing requirements and can run only at the slower speed. See your software manual to determine if this is the case.