4.Replace any option cards you removed. See page 2-14 for instructions.

5.The next time you turn on your computer, run the SETUP program so your computer can update its memory configuration.

Installing an Option Card

This section explains how to install an option card in your computer. Your computer has four option slots to accommodate up to four 8-bit or 16-bit option cards.

Usually it does not matter which slot an option card occupies as long as the card fits in the slot. For example, you can place some 8-bit cards in a 16-bit slot. However, follow these guidelines when deciding which slot to use:

Cl If you have an 8-bit card that has an additional tab along the bottom, it will not fit in any of the option slots in your computer.

Ll If you install a disk drive controller card, place the card in one of the slots closest to the main system board, so the drive cable will not be in the way when you replace the computer’s cover.

Ll If you are installing a high-resolution graphics adapter card, follow the instructions below to install the adapter card; then see “Using the Alternate VGA Interface” on page 2-24 to connect the card to the VGA feature connector in your computer.

2-14 Installing and Removing Options