Accessing Your System
If you have forgotten your current password, follow these steps to access your system:
1.Turn off the computer.
2.Follow the instructions under “Changing the Jumper Settings” in Chapter 2 to disable the password function by setting jumper J13 to position A.
3.Turn on the computer.
4.When you see Press <F2> to run SETUP, press [. You see the SETUP screen. If you do not want to set a new password, go to step 6. If you want to set a new password, go to step 5.
5.To set a new password, highlight Password and press IEnter Then press c. Type a new password at the prompt and press IEnter You must enter the new password twice. (See Chapter 2 of the Setup Guide for more information about setting a password.) Now go to step 7.
6.To disable password checking, highlight Password security and press IEnter Then press &I or a to change the setting to Not installed. (See Chapter 2 of the Setup Guide for more information.)
7.Save your settings as you exit SETUP. (See Chapter 2 of the Setup Guide for instructions.)
8.Turn off the computer.
9.Follow the instructions under “Changing the Jumper Settings” in Chapter 2 to enable the password function by setting jumper J13 to position B.