I
Note
If you turned on network server mode when you ran the SETUP program, you need to use a different procedure to enter your password. See “Using Your Computer as a Network Server” on page
Changing a Password
To change your password, follow these steps:
1.If you do not have a hard disk, insert your system diskette in drive A.
2.Turn on or reset the computer. At the key prompt, enter your current password followed by a forward slash (/) and the new one you want to use. For example, if your current password is 123 and you want to change it to ABC, type:
123/AX
The screen does not display what you type.
Do not use characters requiring the m key, such as %, @, or #, in your new password. The computer does not distinguish between characters that are produced with the m key and those that are not.
Be sure to remember the new password you enter, or you will not be able to access your computer the next
3.Press m. A happy face character appears and then the computer loads the operating system.
1 - 2 4 Using Your Computer