If you have the 486SX/33 system, you can enhance your system’s performance by installing an Intel OverDrive processor
Complete instructions for installing the processor are provided in the manual that comes with it. Please follow those instructions carefully, along with the following guidelines:
Ll Although the OverDrive processor User’s Guide instructs you to remove the main system board from the computer, this is not necessary. You can install the OverDrive processor while the board remains inside the computer case; just remove the computer’s cover.
Ll Refer to the illustration on page
Ll If you need to remove the existing microprocessor, lift the lever at the base of the socket to release the chip and then remove it. (This eliminates the need to use the chip puller tool to remove the chip.) When you install the new processor, push the lever down to secure the new chip in the socket.
Cl If you remove the CPU chip to install an OverDrive processor or 487SX/33 chip, you need to change the settings of jumpers J5 through J8. See page
Ll After you install the processor and replace the computer’s cover, run the SETUP program so your computer can update its configuration. See Chapter 2 of the Setup Guide for instructions. (You need only run the program and save the configuration; you do not need to change any settings.)
Installing and Removing Options 2 - 2 1