Note

Before you install an option card, see if you need to change any jumper settings on the system board. For example, if you install a mouse interface card, you need to change the setting of jumpers J9 and J12. If you install a video card, you may need to change jumpers J10 or J11. See page 2-6.

Follow these steps to install an option card:

1.If this is the first time you are installing a card in the option slot, you need to remove the metal cover for that slot on the inside back panel. Remove the retaining screw securing the option slot cover to the computer. (Keep the screw to secure the option card to the computer.)

option slot cover

Installing and Removing Options 2 - 1 5