5-34 SelecType
Dove
Rev. C
A5 size chap5.mif
10/28/98 Pass 0
LProof Sign-off:
Nishi _______
<leadername> _______
<editorname> _______

Before you start printing in the GL/2 mode

You may need to change the printer settings, depending o n your
output needs. First, check th e printer’s settings to make sure they
match the data you are trying to print. Ch eck the following items;
the information may be necessary la te r.
Paper size: Printer’s paper size setting
Driver (plotter selection): HP-GL/2 or HP-GL plotters
Pen cofiguration: Pen number, pen width
Plot origin: Center or Corner
Orientation: GLlike, landscape only
LJ4GL2, landscape or portrait
If you need to configure the printer settings, first switch the
emulation and then change the settings using h e printer driver,
or SelecType.
cCaution:
Settings or data saved in the printer RAM (such as downloaded
fonts) may be erased when you change emulation mode.
PS menu
This menu is only available if the optional EPSONScript Level 2
module has been installed.
End Butt, Square, Triangular, Round
Join Mitered, Miteredbeveled, Triangular,
Round, Beveled, None
Pen 0 through 6 0.05 – 5.00 mm in steps of 0.05 mm
Setting Parameters