A
Technical Specifications A-13
Dove
Rev. C
A5 size appa.mif
10/28/98 Pass 0
R
Proof Sign-off:
Nishi _______
<leadername> _______
<editorname> _______
Using the ECP mode in Windows 95 and Windows 98
To use the ECP mode with a Parallel (IEEE 1284 level I compl iant) connect or,
your computer must support the ECP mode.
Note:
The ECP mode is not available with Windows 3.1, 3.11 for workgroups, Windows
NT 3.51 and NT 4.0.
To use the ECP mode, follow these steps:
1. Make the ECP mode settings in the BIOS setting program that comes
with your computer (for details of the settings and how to use the
program, consult your computer’s documentation).
2. Click the Start button, point to Settings, and then cli ck Control
Panel.
3. Right-click the System icon, and click Open in the menu that appears.
4. Select the Device Manager tab.
5. Select the ECP Printer Po rt under Ports [COM & LPT], then click the
Properties button.
6. Select the Resources tab.
7. Make the appropriate setting in the Resource settings dialog box. This
setting depends on your computer system. For details, consult your
computer’s documentation.
8. Click OK to save the settings.