5-36 SelecType
Dove
Rev. C
A5 size chap5.mif
10/28/98 Pass 0
LProof Sign-off:
Nishi _______
<leadername> _______
<editorname> _______
CG Table
Use the character generator table opti on to select the graphics
character table or the italics table. The graphics table contains
graphic characters for printing lin es, corners, shaded areas,
international characters, Greek characters, and mathematical
symbols. If you select the italics table, the upper half of the
character table is defined as italic characters.
Country
Use this option to select one of the fifteen international symbol
sets. See “Symbol Sets” in Appendix B for samples of the
characters in each country’s symbol set.
Auto CR
This selects whether the printer performs a carriage-return/line-
feed (CR-LF) operation whenever the printer position goes
beyond the right margin. If this setting is Off, the printer doe s not
print any characters beyond the right mar gin and does not
perform any line wrapping until it receives a carriage-return
character. This function is handled automatically by most
software applications.
Auto LF
If you set this option to Off, the printer d oes not send an autom atic
line-feed (LF) command with each carriage-return (CR). If this is
set to On, a line-feed command is sen t with each carriage-return.
You should set this to On if your text lines overprint each other.
Bit Image
If you set this parameter to Dark or Light, the pr inter is able to
emulate the graphics densities s et with the printer commands. If
you select Dark, the bit image density is high, and if you select
Light, the bit image density is low.