6
Troubleshooting and Maintenance 6-21
Dove
Rev. C
A5 size chap6.mif
10/28/98 Pass 0
R
Proof Sign-off:
Nishi _______
<leadername> _______
<editorname> _______
There is not enough memory to print both sides of the d ocument
using the duplex unit. To correct the error, press the Continue
button on the control panel. If the m essage remains, reset the
printer as described in "Reset", on page 6-29. You may also be able
to clear this message by turning the prin te r o ff, waiting 10
seconds, and then turning it back on.
If you continue to receive this message when pr inting a particular
page, try simplifying the page by limiting the number of graphics
or reducing the number and size of fonts.
You can also add more memory to the p rinter as described in
Chapter 3, "Options".
An attempt has been made to u se the duplex unit, but the co rrect
setting has not been made..
The duplex unit is not working corr e ctly. Check the installation
of the unit.
Paper is jammed in the printer. See "Paper jammed at the paper
exit", on page 6-8 for details about removing jams from in the
printer.
Duplex Mem OverflowDuplex print was offDuplex Unit FailExiting Paper Jam