8 Getting Started
Dove
Rev. C
A5 size intro.mif
10/28/98 Pass 0
LProof Sign-off:
Nishi _______
<leadername> _______
<editorname> _______
Ozone safety

Ozone emission

Ozone gas is generated by laser printers as a by-product of the
printing process. Ozone is produced only when the printer is
printing.

Ozone exposure limit

The recommended exposure limit for ozone is 0.1 parts per
million (ppm) expressed as an average time-weighted
concentration over an eight (8) hou r pe riod.
The EPL-N1600 laser printer generates <0.01ppm for 8 hours of
continuous printing when considering a closed room of
approximately 1000 cu ft (8' × 10' × 12').

Minimize the risk

To minimize the risk of exposure to ozone, you should avoid the
following conditions:
Use of multipl e laser printe rs in a confined area (see abov e)
Operation in conditions of extremely low humidity
Poor room ventilation
Long, continuous printing together with any of the above

Printer location

The printer should be located so that the exha u st gases and heat
generated are:
Not blown directly into the user' s face
Vented directly out of the building whenever possible