If the paper reaches the bottom of the print area when any of the following line feed commands is used, the sheet in the printer is automatically ejected and the next sheet is loaded.

LF:

Line feed; advances the paper one line

VT:Vertical tab; advances the paper to the next vertical tab position

ESC J:Line feed; advances the paper n/180th of an inch

Software is not effective while the printer is off line. Make sure that the printer is on line if you wish to control the cut sheet feeder using software commands.

Switching Between the Cut Sheet Feeder and Push Tractor

The printer lets you switch easily between the cut sheet feeder and tractor-feeding systems without having to remove either the feeder or the continuous paper supply.

1.Make sure the continuous paper is already loaded and in the standby position. Next, press the ON LINE button to set the printer off line.

Using the Printer Options

5-15