Selecting a Paper Feeding MethodThe lever positions are marked by icons.
Single sheet position: When you load single sheets from either the paper guide or from the optional cut sheet feeder, the lever should be all the way back.
Continuous feed position: When you load continuous paper with the built-in push tractor, the lever should be all the way forward on the standard width printer and in the middle on the wide carriage printer.
Pull tractor position-wide carriage printer only: When you load continuous paper with the optional pull tractor, the lever should be all the way forward on the wide carriage printer. Even when you use the built-in push tractor at the same time, you must set the lever to this position. Only select this position if you are using the optional pull tractor.
Note: On the standard width printer, the paper release lever is in the forward position for continuous paper whether the paper is loaded from the built-in push tractor or the optional pull tractor.
