ESC D |
|
|
| Set Horizontal Tabs | ||
Format: | ESC | D | n1 |
|
|
|
ASCII code: | n2 | … | 0 | |||
Decimal: | 27 | 68 | n1 | n2 | … | 0 |
Hexadecimal: | 1B | 44 |
| n1 n2 | … | 00 |
Comments:
This command allows setting of up to 32 horizontal tabs, which are entered as n1, n2, n3, etc. (from 1 to 255), with the number 0 terminating the command. The tab settings must be entered in ascending order. ESC D 0 clears all tabs. The default settings, when power is turned on or after an ESC @ command, are at every eight characters. The tab settings are not affected by changes in cpi. The tab positions in proportional printing are determined by the 10 cpi character size.
Overall | Printing | Style |
|
|
ESC x |
|
|
| Select Letter Quality or Draft |
|
|
|
|
|
Format: |
|
|
| n |
ASCII | code: | ESC | x | |
Decimal: | 27 | 120 | n | |
Hexadecimal: | 1B | 78 | n | |
Comments:
The following values can be used for n:
0:Selects draft mode.
1:Selects Letter Quality (LQ) mode.
Overrides the SelecType panel setting.
ESC k |
|
| Select Typestyle Family |
Format: |
|
|
|
ASCII code: | ESC | k | n |
Decimal: | 27 | 107 | n |
Hexadecimal: | 1B | 6B | n |