The print position is not what you expected.

•Printing starts too high or too low on the page.

Use micro-adjustment to adjust the loading position.

Check the top margin set by your application software and adjust it.

•All the text is printed on the same line.

Set DIP switch 2-4 on so the printer automatically adds a line feed code to each carriage return.

•The text is printed with an extra blank line in between.

Two line feed signals are being sent. Set DIP switch 2-4 off.

•Page length does not match the length of the paper.

Check the page length set by DIP switches 1-4 and 1-5.

Check the page length set by your application software and adjust it if necessary.

•Regular gaps occur in the printout.

One-inch skip over perforation may be set. Set DIP switch 2-3 to off.

•Skip over perforation is set, but the perforation does not fall in the center of the skip.

Adjust the loading position.

Troubleshooting 7-5