ESC U |
|
| Turn Unidirectional Mode On/Off |
Format: | ESC | U | n |
ASCII code: | |||
Decimal: | 27 | 85 | n |
Hexadecimal: | 1B | 55 | n |
Comments:
The following values can be used for n:
1:Turns the mode on
0:Turns the mode off
Printing is normally bidirectional. This command selects unidirectional printing for more accurate positioning.
ESC EM |
|
| Control Cut Sheet Feeder |
Format: | ESC | EM | n |
ASCII code: | |||
Decimal: | 27 | 25 | n |
Hexadecimal: | 1B | 19 | n |
Comments:
The following values can be used for n:
0:Turns mode off
4:Turns mode on
R: Ejects a sheet. (No paper is loaded.)
The command should not be used unless the cut sheet feeder is installed. It is ignored if any value other than 0, 4, or R is used for n.
The cut sheet feeder mode can also be turned on and off by setting DIP switch