6. 5 TCP/IP menu
This menu can be opened by selecting Device, Configuration, and then the TCP/IP tab.
The TCP/IP menu helps you configure the TCP/IP settings on the network interface.
The following table explains in detail how this menu works.
Item | Explanation |
|
|
Manual, Automatic, | Select the method for assigning an IP address. The choices here vary depending |
DHCP, BOOTP, RARP | on the network interface. |
| If you select Automatic, a different IP address is assigned to the network |
| interface every time you turn on the device. If you do not have a DHCP server with |
| DNS support, select Manual here and specify an IP address directly. |
| If you select Automatic when DHCP, BOOTP, and RARP are all grayed out, |
| TMNet WinConfig will obtain an IP address from the server by automatically |
| determining the server type. |
Set using Automatic | If this check box is selected, a private IP address is automatically assigned to the |
Private IP Addressing | network interface by APIPA (Automatic Private IP Addressing) when there is no |
(APIPA) | DHCP server on the network or there is no response from the DHCP server. The |
| private IP address will be in the range of 169.254.0.1 to 169.254.255.254. |
| This check box is grayed out if the IP Address Setting is set with Manual or |
| APIPA is not supported. |
Set using PING | Select this check box when setting an IP address using the ARP/PING command. |
|
|
16/25
©SEIKO EPSON CORPORATION
