Epson PowerLite 7900p Using Keystone Correction, Using Quick Corner, Menu, Menu, Enter, Enter, Enter, Setting, Keystone, Press the, V-Keystone, H-Keystone, Or press the

Using Keystone Correction

To adjust your image when it is wider on one side, do the following:

■Look at the shapes of the icons on the projector’s four Keystone buttons. Press the button whose icon is the mirror image of the shape of your screen image. Continue pressing the button until you are satisfied with the shape of the image.

Keystone buttons

■Or press the Menu button on the remote control, select the Setting menu, and press Enter. From the Setting menu, select H/V-Keystonein the Keystone menu and press Enter. Select V-Keystone(for vertical keystone distortion) or H-Keystone(for horizontal keystone distortion) and press Enter. Use the pointer button on the remote control to adjust the keystone setting as needed.

Using Quick Corner

Use Quick Corner to correct a trapezoid-shaped image, with no parallel sides:

1.Press the Menu button on the remote control (or on the projector’s control panel).

2.Select the Setting menu and press Enter.

3.From the Setting menu, select Keystone and press Enter.

4.Select Quick Corner and press Enter.

note

The image will be slightly shorter after adjusting. If it’s important to maintain the correct aspect ratio, use the menu system to perform keystone correction, then adjust the Height setting as needed. See page 71.

Menu button

note

For more information on using the menu system, see Chapter 4.

Projecting 45