Epson PowerLite 7900p Managing the Projector from a Remote Computer, ■Using EMP Monitor, ■Using EMP NetworkManager, Use EMP NetworkManager to receive

note

Aplug-in will be available to allow you to manage your projectors in HP OpenView. Check with your dealer or Epson for availability (see page 121).

If you’re using a network management utility running SNMP, you can configure your network to send trap alerts even without a plug-in (see page 87). This feature is intended for use by network administrators only.

Managing the Projector from a Remote Computer

Your projector’s Easy Management software lets you monitor and control your projector(s) from a remote computer in several ways:

■Use EMP Monitor to see your projectors’ status, switch image sources, and control basic settings.

■Use EMP NetworkManager to receive e-mail notifications alerting you to possible problems.

■Use a network management utility running SNMP, such as HP OpenView,™ to manage your facility’s equipment from a pre-existing system.

To use the Easy Management software to manage your projector(s), first install it as described on page 86. Then connect and configure each projector you want to monitor, so it can be recognized on your network (see page 87).

This chapter covers the following information:■Installing the Easy Management software■Connecting the projector to and configuring it for the network■Using EMP Monitor■Using EMP NetworkManager

85