note

If the User’s Logo Protect option is ON, you see a message that the logo cannot be recorded. You’ll need to disable the User’s Logo Protect option before you can create or change the user’s logo. See page 81.

Creating Your Own Screen Logo

You can transfer any image on your computer to the projector, and then use it as the startup screen and/or the screen that is displayed when you press the A/V Mute button. The image can be a company logo, slogan, photograph, or any other image you want to use. The projector considers this image the “User’s Logo.”

Follow these steps to capture the image and transfer it to the projector:

1.Display the image you want to use on the projector. You can use an image from either a computer or video source, such as a VCR.

2.Press the Menu button and select the User’s Logo menu.

Video

Audio

Effect

Setting

User's Logo

Execute

Advanced1

Advanced2

About

Reset All

[ ]: Select [ ]: Execute

[Menu]: Exit

3.Press Enter to select Execute.

4.When you see a message asking if you want to use the present image as a user’s logo, select Yes and press Enter. A selection box displays over the image.

5.Use the pointer button on the remote control or the arrow buttons on the projector to select the area of the image you want to use. Once you have selected the area, press Enter.

6.When you see the message Select this image?, choose Yes and press Enter. If you want to change the area selected, select No, press Enter and repeat steps 4 through 6.

78Fine-tuning the Projector