Epson PowerLite 7900p Adjusting the Image Quality, Adjusting Images from Video Sources, DVI, Use the, ■Position, ■Contrast, Video menu, ■Brightness, 68Fine-tuningthe Projector

note

The Brightness setting changes the opacity of the projector’s LCD panels. You can also adjust the brightness of the lamp itself. Select Brightness Control in the Advanced2 menu, then choose High or Low (the default setting is High). Selecting the low brightness setting extends the life of the lamp (see page 126).

Adjusting the Image Quality

You can use the Video menu to adjust the brightness, sharpness, color, tint, and contrast. If you’re projecting from a computer (but not through the DVI port), there are additional adjustments you can make (see page 69).

Adjusting Images from Video Sources

1.Press the Menu button on the remote control, then select theVideo menu.

You see the Video menu screen. (The actual settings may vary, depending on the selected input source. The Video menu below is for a composite video or S-Video source.)

Video	Position		Adjust
Audio	Brightness	:	0				+
Effect	Contrast	:	0				+
Setting	Color	:	0	-		+
User'ssLLogo	Tint	:	0	-		+
Advanced1	Sharpness :		0	-		+
Advanced2	Color Mode		Select [Dynamic		]
About	Video Signal		Select [Auto		]
Reset All	Reset		Execute
[ ]: Select [ ]: Enter					[Menu]: Exit

2.Use the pointer button to highlight the desired option, then adjust it as needed:

■Position

If the image is slightly cut off on one or more sides, it may not be centered exactly. Use this setting to center it (not available for RGB video images).

■BrightnessLightens or darkens the overall image.■ContrastAdjusts the difference between light and dark areas.

68Fine-tuning the Projector