■Sync

Adjust this value if the image appears blurry or flickers.

■Brightness

Lightens or darkens the overall image.

■Contrast

Adjusts the difference between light and dark areas. Select Auto to let the projector adjust the contrast automatically, or select Manual to adjust the setting yourself. (Press Enter after you make the selection.)

■Sharpness

Adjusts the sharpness of the image.

■Resolution

If your image is distorted (compressed, stretched, partially cut off, or doesn’t completely fill the display area), the projector’s resolution setting may not match that of your computer.

Select Auto to let the projector adjust the resolution automatically, or Manual to adjust the setting yourself. (Press Enter after you make the selection.)

■Preset

Once you’ve fine-tuned the settings in the Video menu for the computer you’re using, you can save them as a group using one of the ten Preset settings. The next time you use the same computer, simply press the Preset button on the remote control to recall your saved settings. (Press the Preset button repeatedly to select the number corresponding to the setting you want to use.)

70Fine-tuning the Projector