Epson PowerLite 7900p Controlling Multiple Projectors, Setting the Projector ID, Press the, and press, 4.Press Enter to set the value, Press the right or left side of the

Controlling Multiple Projectors

If you’re using more than one projector, you can control all the projectors—or just selected ones—by using the projector ID system. To operate a projector, you have to set the remote control’s ID to match that of the projector. Or you can control all of the projectors simultaneously by setting the remote control’s ID to zero.

Setting the Projector ID

The projector’s default ID is 1. If you need to change it, follow these steps:

1.Press the Menu button on the remote control. You see the projector’s menu screen.

2.Select the Advanced2 menu and press Enter. Then highlight

Projector ID and press Enter.

Video	Brightness Control : High		Low
Audio	Projector ID	: 1	Set
Effect	Network		Set
Setting	COM Port	: RS-232C		USB
User'ssLLogo	Auto setup	: ON	OFF
Advanced1	BNC Sync Termination :		ON	OFF
Advanced2	Reset		Execute
About
Reset All

[ ESC ]: Return [ / ]: Select [ ]: Set [Menu]: Exit

3.Press the right or left side of the pointer button to increase or decrease the ID value.

4.Press Enter to set the value.5.When done, press ESC to exit the menu system.

Using the Remote Control 63