Epson PowerLite 7900p Using EMP NetworkManager, Selecting the Projectors to Monitor, the, icon, double-click, You see this screen:, 96Managing the Projector from a Remote Computer

Using EMP NetworkManager

You can use EMP NetworkManager to send out messages by e-mail, notifying you when a problem occurs with a projector. Before running EMP NetworkManager, make sure you’ve installed the software as described on page 86. Then follow the steps below to create e-mail settings for each projector you want to monitor.

Selecting the Projectors to Monitor

1.To start EMP NetworkManager, click Start > Programs or

All Programs > EPSON Projector > EMP NetworkManager.

You see the EMP NetworkManager screen. The projectors you’ve already registered through EMP Monitor appear as icons.

2.If you’d like to register a projector manually and you know its IP address, double-click the Proj(ector) address selection icon.

You see this screen:

96Managing the Projector from a Remote Computer