Epson PowerLite 7900p Yes, Esc, and, note, Enter, Enter, , the, If the, A/V Mute, Completed, Advanced1 menu, Startup Screen, option has been set to, When you see the message

7.When you see this screen, select a zoom rate (display size), and then press Enter.

User's Logo

Set the zoom rate.

Zoom rate:

100% 200% 300%

8.When you see the message Save image as user’s logo?, select Yes and press Enter. Saving the logo takes about 15 seconds. Do not use the projector or other sources (computer, video, etc.) while the logo is being saved.

9.When you see the message Completed, press Esc.Choosing When to Display the Image

After your image is saved, you can set it up as the startup screen, or the screen you see when there’s no signal or when your press the A/V Mute button.

1.Press the Menu button to display the menus screen (if not already displayed).2.To display your image as the startup screen, select theAdvanced1 menu.3.Select Startup Screen, highlight ON, and press Enter.4.Select the Setting menu.

note

If the User’s Logo Protect option has been set to ON, the No-Signal Msg. and

A/V Mute settings cannot be changed. You need to turn the protect function off first. See page 81 for details.

Once you’ve saved a user’s logo, you cannot reset the logo setting to its factory default (no logo).

Fine-tuning the Projector 79