Using the Projector 9
5. Turn on the main power switch on the back of the projector.
The P power light on top of the projector flashes orange, and
then stays orange.
6. Turn on the power to any equipment connected to the projector.
7. Press the Power button on the remote control or the top of the
projector.
The P power light flashes green as the projector warms up, and
the projection lamp comes on in about 15 seconds. The power
light stays green, and you may see a blue screen with the No
Signal message displayed. This is normal.
Orange
note
The projector will not
respond to any buttons on the
control panel or remote
control while the power light
is flashing orange or green.
warning
Never look into the lens when
the lamp is on. This can
damage your eyes, and is
especially dangerous for
children.
Green