34 Fine-tuning the Projector
Saving and Recalling Image Quality Settings
You can save the image quality settings for a particular computer or
video source and then recall them later automatically by just pressing
the Memory button on the remote control. This is useful if you use
more than one input source with the projector; you can save the
settings for each one and recall them when necessary.
You can save the settings in the Video and Advanced menus, as well as
the current aspect ratio setting.

Saving Menu Settings

Follow these steps to save the projector’s current settings:
1. Press the Menu button to display the main menu.
2. Make sure all the settings are correct in the Video and Advanced
menus.
3. Select Memory from the Video submenu.
4. Press the or button (control panel) or press right or left on
the Select button (remote control) to choose the memory
number you want to use for saving this group of settings. These
numbers correspond to buttons 1 through 6 on the remote
control.
5. Press the Select button to confirm the memory setting.
6. Press Esc or Menu to exit.
Memory
Color Adjustment
Black Level
White Level
Sharpness
Color
0
Tint
Color Mode
Reset Execute
+
-
0+
-
0+
-
0+
-
0+
-
12 3 4 5 6
Adjust
Color Temp. RGB
Select
Video
Setting
Advanced
About
Reset All
Return Select Adjust