60 Appendix A: Connecting the Projector to a Computer
4. Connect the other end of the computer cable to your computer’s
video port.
If you’re using a Macintosh and the cable doesn’t fit, you may
need to use the Macintosh desktop adapter.
To use the adapter, remove its cover as
shown and set its DIP switches according
to the resolution you want to use, such as
16-inch mode. See your Macintosh
documentation for instructions.
Replace the cover and connect the
adapter to the free end of the computer
video cable. Then plug the cable (with
the adapter) into the video port on your
Macintosh.
5. Tighten the screws on the connectors.
Now you are ready to plug in your projector and turn it on. See page 8
for instructions.
Be sure to check the setting for the Input B port in the Setting menu
(as described on page31) to make sure it is correct for your computer.
note
You can purchase a desktop
adapter from EPSON; see
p
age 4.