12 Using the Projector
Adjusting the Image
Once you see your image, you’ll need to make certain adjustments:
■If the image is too high or too low, you can reposition it as
described below.
■To focus or zoom your image, see page 13.
■If the image isn’t square, see page 14.
■To select a different color mode, see page 16.
■To change the aspect ratio, see page 17.
■If the projected image is flickering or “noisy,” see page 19.

Adjusting the Height of Your Image

The projector should be as perpendicular to the screen as possible. If
the image is too low, you can raise it by extending the projector’s front
foot.
1. Stand behind the projector. Press the foot release button and lift
the front of the projector. This unlocks the foot.
2. Once the image is positioned where you want it, release the
button to lock the foot in place.
Foot release button