Solving Problems 49
Status lights
Light Status Description
orange The projector is in standby mode. You can press the Power button to
turn it on, or turn off the power switch on the back of the projector to
turn it off.
flashing green The projector is warming up. Wait for the image to appear.
green The projector is operating normal ly.
flashing orange The projector is cooling down. You can’t turn it back on (and you
should not turn off the main switch on the back or unplug it) until the
light stops flashing and remains orange.
red
flashing red
flashing red
Power is cut off because of an internal problem. Remove the power
cord and contact your dealer for help.
flashing orange The lamp is almost burned out. Make sure you have a replacement
lamp ready.
red
red
The lamp is burned out. Replace it a s described on page 40.
flashing orange The projector is too hot and is in cooling mode. Make sure the
temperature surrounding the proj ector does not exceed 95 °F (35 °C)
and there is plenty of space around and under it for ventilation. Clean
the air filter if necessary. See page38 for instructions.
red
red
The projector is overheating, which turns off the lamp automatically.
Let it cool for five minutes, then turn it back on. Make sure there is
plenty of space around and under the projector for ventilation. If it
continues to overheat, you may need to change the air filter. See
page 38 for instructions.
red
flashing red
The lamp was not cooled down properly. The main power switch was
turned off before the projector cooled down the last time it was used,
and then the projector was turned back on before one hour. Turn off
the projector, wait 2 minutes, and when the fan stops, turn off the
main switch. Wait another 2 minutes, then turn the projector back on.
red
flashing red
There is a problem with the cooling fan or temperature sensor. Turn
off the projector and unplug it. Contact your dealer for help.