Fine-tuning the Projector 31
■Noise Reduction (available for 480i and 575i image
signals only)
Turn this feature on (select NR1 or NR2) to reduce visual
“noise” to make the image softer. This is especially useful
when text and video images are combined, as in movies with
subtitles. If you are projecting from a DVD player, this
setting should usually be off because DVDs are relatively free
from interference.
■Position
See “Repositioning the Image” on page 32.
■Video Signal (available for composite or S-Video
signals only)
Leave this setting to Auto unless the input source is N-PAL
format or the documentation for your input source says to
select a specific setting.
■Input A (available for 480i and 575i image signals only)
Specifies the format for the component video source
connected to the Input A port. Select YCbCr for DVD
images or YPbPr for progressive scan DVD or HDTV
images.
■Input B
Specifies the format for the source connected to the Input B
port. If the source is a computer, select RGB. Select YCbCr
for DVD images or YPbPr for progressive scan DVD or
HDTV images.
■Setup Level (available for composite, S-Video, or 480i
and 575i image signals)
If you are using the projector with a non-standard input
source that has different black level settings, use this feature to
adjust the image and select 0% or 7.5%. See the
documentation that came with the input source for more
information.
4. When you’re finished, press Esc or Menu.