Fine-tuning the Projector 33
3. Use the , , , or buttons on the control panel or the
Select button on the remote control to set the following options:
■Keystone
Corrects keystone distortion of the image. This procedure
makes the image smaller. If the image looks uneven after you
adjust the shape, decrease the Sharpness setting (see page 28).
■No-Signal Msg.
Selects a screen color (blue or black) to display when the
projector is not receiving a signal. (The logo setting displays
the EPSON logo.)
■Startup Screen
Turn on this option to display the EPSON logo whenever the
projector starts.
■Blank
Selects the screen color to display (blue or black) when you
press the Blank button. (The logo setting displays the
EPSON logo.)
■Sleep mode
When sleep mode is on, the projector turns off the lamp if it
has not received any input signals for the specified amount of
time (1, 5, or 10 minutes). The default setting is OFF.
■Projection
Selects the projection method, as follows:
■Language
Select from 9 languages to be used for the projector menus.
4. When you’re finished, press Esc or Menu.
Setting Projector position
Front Projector is in front of the screen
Front/Ceiling Projector is in front of the screen,
mounted upside-down from the ceil ing
Rear Projector is behind the screen
Rear/Ceiling Projector is behind the scr een, mounted
upside-down from the ceiling