Using the Projector 19
Adjusting the Tracking and Synchronization
If you’re projecting from a computer and displaying an image that
contains a lot of detail (such as the text of a letter), you may notice one
or more vertical stripes or bands, or some of the characters may look
heavy or blurred. You can increase the clarity by pressing the Auto
button on the remote control. This resets the projector’s tracking,
sync, and position settings.
If further adjustment is needed, you can correct the image manually
using the Tracking and Sync options in the Video menu. (See
page 29.)
Turning Off the Picture and Sound You can use the Blank button on the remote control to darken your
screen and turn off the sound. This is useful if you pause the video.
■To turn off the picture and sound, press the Blank button. The
screen goes dark.
■To turn the picture and sound back on, press Blank again.
If you don’t pause the video it continues to play even though you can’t
see or hear it. When you press the Blank button again to resume, the
playback does not resume at the exact point you paused it.
Auto button
Incorrect tracking Incorrect sync
note
You can make the blank
screen blue, instead of black,
or display the EPSON logo
on the screen whenever you
p
ress the Blank button.